Showers
Which shower tray will fit your space?
From a compact square tray to a low-profile rectangular one, compare the footprint, waste position and the fittings you need to order.
Models in this guide
Start with the space underfoot
The shower tray forms the floor you stand on. Measure the length and width between the finished walls at several points. In a narrow recess, record the smallest measurement and ask your installer to check the fit. For a corner shower, mark the side you will use to step in.
Plot the Fidji and Duetto on your plan
The Fidji comes in 70 × 70 and 80 × 80 cm. Tape out its square footprint if the door or vanity is close by. The 170 × 70 cm Duetto gives you a long, rectangular shower. If you are replacing a bath, lay the Duetto drawing over your plan and check where its waste sits in relation to the existing pipework before choosing it.
Check the waste fitting and screen
Both trays featured below are supplied without a waste. The Duetto product page specifies a 90 mm waste. Check the clearance beneath the tray and the direction of the waste outlet before choosing the fitting. For a shower screen, measure between the finished surfaces along the line the glass will follow, then check this against the adjustment range for your chosen screen.
Before you order
- Usable width and length once the tiles are in place
- Waste position and clearance beneath the tray
- Product details for the waste, grate and screen




